ORP measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.

pH measurements with DULCOTEST^® sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.

Accurate measurement of fluoride with DULCOTEST^® sensors in the monitoring of potable water and waste water, suitable for pH values up to 9.5.

Bromine measurement with DULCOTEST^® sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for wide range of water qualities.

Chlorine dioxide measurement with DULCOTEST^® sensors offers precise, reliable, application-specific measured values in real time for all oxidation and disinfection tasks.

The application-based DULCOTEST^® sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

Disinfection of swimming pool water with the application-optimised DULCOTEST^® sensors for total available chlorine - exact measured values and high process reliability guaranteed.

Reliably measure total chlorine with the versatile DULCOTEST^® sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.

Temperature measurement with DULCOTEST^® sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

Generate ultra-pure chlorine gas using the vacuum method with electrolysis system CHLORINSITU^® IV Compact. Cost-effective, robust and compact.

Electrolysis system CHLORINSITU^® II: Robust, safe and economical system for areas where carry-over of sodium chloride into the water being treated is not a problem.

Need sodium hypochlorite that is high-purity or low-chloride and low-chlorate? The electrolysis system CHLORINSITU^® III is the solution. Can be used for potable water, waste water, process water, swimming pool water and in cooling towers.

Generation of active chlorine in combination with a sodium hypochlorite solution using the vacuum process with the electrolysis system CHLORINSITU^® V Plus. Chlorination and pH value adjustment from a single system.

Generate ultra-pure active chlorine using the vacuum method with electrolysis system CHLORINSITU^® V. Suited to applications for metering hypochlorous acid and simultaneously correcting the pH value.

The flow meter DulcoFlow^® reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance, as all wetted parts are made of PVDF and PTFE.

Injectors for chlorine gas, series DULCO^®Vaq, generate a stable vacuum even at high operating pressures.

The ready-wired modular metering system DULCODOS^® is used for the ultra-precise metering of chemicals. It has a modular design and can be flexibly integrated into the most varied applications.

The metering system POLYMORE is the inline batching station in which the liquid polymer is introduced into the pressure-encapsulated multi-zone mixing equipment through a peristaltic pump. The result is a prepared and homogeneous polymer solution.

The metering system PolyRex is a double-decker batching station for the processing of liquid and powdered polymers. It consists of the feed and mixer unit and the two stainless steel double-decker tanks. The polymers used are ideally utilised.

The metering system Ultromat^® ATR (continuous flow system with round tank) is used for processing powdered polymers into ready-to-use polymer solutions.

Manual polymer batching station Ultromat^® MT: Perfect metering system for the processing of small quantities of liquid and powdered polymers: extremely robust and cost-effective.

The ProMinent metering system Ultromat^® ULDa is an automatic polyelectrolyte preparation system. It is useful wherever polymers need to be automatically prepared as polymer solutions to act as flocculation aids.

Polymer batching station Ultromat^® ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.

The metering system Ultromat^® ULPa (oscillating system) is ideal for batching flocculation aids for the preparation of a ready-to-use polymer solution.

The motorised control valve for chlorine gas DULCO^®Vaq type PM 3531 ensures precise electronically controlled metering of the chlorine gas flow. The linear control characteristic is guaranteed by an externally controlled step motor.

OZONFILT^® OZMa represents maximum operational safety with minimal operating costs. The ozone generator is maintenance-free and generates up to 735 g/h of ozone from compressed air or oxygen.

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

The measuring instrument Portamess^® conductivity is a robust, leak-tight and battery-operated hand-held measuring instrument with a large measuring range and automatic or manual temperature compensation, which can be used in the industrial, environmental, food and waste water sectors.

pH and ORP measurement with Portamess^® pH/ORP - battery-powered, hand-held meter with automatic or manual temperature compensation.

The OZONFILT^® Compact OMVa is a complete, ready-to-use ozone system solution for the generation and metering of ozone. The components are perfectly coordinated to each other.

The UV system Dulcodes A helps to ensure water quality. The UV system works energy-efficiently and cleanly based on continuously variable medium pressure lamps and can therefore automatically compensate for variations in the water quality or level of contamination.

UV system Dulcodes LP for potable water disinfection, certified to DVGW, ÖVGW and UVDGM standards. Pioneering water treatment - highly efficient by Vario-Flux lamps with dynamic lamp heating.

Disinfection of saline sea water or thermal water without corrosion problems with the UV system Dulcodes LP-PE Plastic. The UV system consists of a reactor and a UV sensor made of highly UV-resistant plastic.

The unique UV systems Dulcodes LP are synonymous with pioneering water treatment – efficient and free of chemicals.

The UV system Dulcodes MP for water treatment and disinfection in swimming pools. Combined chlorine is broken down and the typical swimming pool odour is eliminated: no more irritation for eyes, nose and skin. A manual stage switch permits adaptation to the required capacity requirement.

The vacuum dosing regulator DULCO^®Vaq meters chlorine gas cost-effectively and highly efficient. Maximum possible operating safety and reliability is ensured by the use of high-quality materials, such as tantalum and silver.

Vacuum switches DULCO^®Vaq PM 400 and 440 automatically and reliably switch between two chlorine gas storage tanks. They therefore ensure an uninterrupted chlorine gas supply, even if a chlorine gas storage tank becomes empty.

On 21 March 2016, the founder and former Chairman of the Supervisory Board of the ProMinent Group, Prof. Dr. h.c. Viktor Dulger, died at the age of 80

The first German edition of the international trade show for industrial pumps, valves and processes, Pumps & Valves, which takes place on 29 & 30 March 2017.. International top players have already reserved their stands - including ProMinent GmbH. The international global player will present a new dosing system as well as new process and dosing pumps at Stand C 04 in Hall 5 of Messe Westfalenhallen Dortmund.

Safe use of the solenoid driven metering pump gamma/ X and Beta® b in the food and beverage industry.These pumps can now also be supplied with FDA certificates. In both the PVDF and stainless steel versions, components which come into contact with the product are made from physiologically harmless materials.

Taronga Zoo in Sydney celebrates its centenary in 2016. Its most popular attractions include the lively inhabitants of its many salt water tanks. ProMinent technology guarantees the very best quality of water and thus also optimum living conditions.

Swimming in the Rhine has been the cult thing to do in Basel for many years – and yet it's not everyone's cup of tea. By contrast, generate perfect water quickly and cost-effectively in your own pool using a compact metering system DULCODOS® Pool.

How do you fancy trying a drink containing 1,3,7-trimethylpurine-2,6-dione, 2-aminoethanesulphonic acid and vast amounts of α-D-glucopyranosyl-β-D-fructofuranoside? Surely you wouldn't even contemplate it? Are you sure? You'll find these ingredients in many energy drinks!

Construction of a new 900 MW power station places tough demands on everyone involved. It's good to be able to rely on a supplier like ProMinent, who easily meets the demanding requirements thanks to in-house production.

The air contains dust which is constantly being swirled around. Then there's water. And high-pressure jets from all directions, for minutes at a time. Harsh conditions – but no problem for the gamma/ X, because it now offers IP 66 protection.

"All in all, it was a great trade fair. We are very happy!" said Robert Günther, Divisional Manager, Food & Beverage at ProMinent Deutschland GmbH, of BrauBeviale in Nuremberg, which attracted a large number of visitors. He added: "On all three days of the trade fair, we entered into a lot of quality discussions with existing and potential customers from Germany and abroad. We were able to arrange numerous follow-up meetings."

Flexibility, low costs, fast delivery and easy commissioning – when it comes to complex metering tasks, these are the benefits users are looking for. And with the new metering system DULCODOS® universal, that's exactly what ProMinent delivers! The Heidelberg-based manufacturer will unveil the new system at at Brau Beviale 2016 in Nuremberg between 8 and 10 November 2016, at stand 6-351 in Hall 6. The system is fitted with the optimum pump for each specific application.

ProMinent is presenting components and systems it has developed and manufactured in-house at BrauBeviale 2016 in Nuremberg. Particular highlights on stand 6-351 in Hall 6, from 8 - 10 November 2016, include the DULCO®Lyse and the new Solenoid Driven Metering Pump gamma/ X. These ensure effective, safe and gentle beverage production.

ProMinent will be demonstrating its effective disinfectant solutions for bottler injection systems, CIP applications and treating product water at Stand 6-351 in Hall 6 at BrauBreviale 2016 from 8 to 10 November 2016: The Electrolysis System Dulcolyse delivers reliable disinfectant with minimal chlorate and chloride content.