CIP - Cleaning In Place

Suggestions

Products

Requirements - CIP - Cleaning In Place

Overview
Downloads

You don't have to disassemble your systems into all their individual parts for a high standard of hygiene. ProMinent CIP (Cleaning In Place) solutions efficiently clean all system parts in their current location. Using a reproducible disinfection process – with accurate, time-dependent metering of cleaning agents, pressure and temperature – maintains a high quality standard at all times. The locally manufactured disinfectants are absolutely precise and impressively economical: ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary, chlorine dioxide Chlorine dioxide is an exceptionally reactive gas, which is not stored due to its instability ... more in the glossary and ECA water Generally referred to as ECA water, hypochlorous acid (HCIO) is increasingly used as a disinfectant ... more in the glossary (Dulco®Lyse) are metered in small amounts but are highly effective. This cuts operating costs, so the system quickly pays for itself. The disinfection process is also used in other applications such as rinsers and cap disinfection – further cutting operating costs. We are happy to provide advice.

Downloads for CIP - Cleaning In Place

Selected filters:

Matching downloads

Sort by Document type

A bis Z

Load more matches ...

No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

Downloads

Suitable products - CIP - Cleaning In Place

Motor-Driven Metering Pump Sigma/ 1 (Basic type)

Capacity range 17 – 144 l/h, 12 – 4 bar

The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

Motor-Driven Metering Pump Sigma/ 2 (Basic Type)

Capacity range 50 – 420 l/h, 16 – 4 bar

Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

Motor-Driven Metering Pump Sigma/ 3 (Basic Type)

Capacity range 146 – 1,030 l/h, 12 – 4 bar

The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

Motor-Driven Metering Pump Sigma X Control Type – Sigma/ 1 - S1Cb

Capacity range S1Cb: 21 – 117 l/h, 12 – 4 bar

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

Motor-Driven Metering Pump Sigma X Control Type – Sigma/ 2 - S2Cb

Capacity range S2Cb: 61 – 353 l/h, 16 – 4 bar

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

Motor-Driven Metering Pump Sigma X Control Type – Sigma/ 3 - S3Cb

Capacity range S3Cb: 182 – 1,040 l/h, 12 – 4 bar

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

DULCOTEST sensors for conductivity

Graduated measuring ranges 0.01 µS/cm – 2,000 mS/cm

Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

Chlorine Dioxide System Bello Zon CDLb

0 – 120 g/h capacity with storage of up to 60 g of chlorine dioxide for peak metering. Max. flow rate at 0.2 ppm ClO₂ metering capacity of 600 m³/h

Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, especially suitable for multiple points of injection. Bello Zon CDLb produces ClO₂ discontinuously using the acid/chlorite process with diluted chemicals.

Chlorine Dioxide System Bello Zon CDEb

5-200 g/h chlorine dioxide. Max. flow at 0.2 ppm ClO₂ metering is 1,000 m³/h

Chlorine dioxide system, which continuously produces ClO₂ according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via contacts.

Chlorine Dioxide System Bello Zon CDVd

2.5 – 2,000 g/h chlorine dioxide. Maximum volume of water that can be treated with metering of 0.2 ppm ClO₂, depending on the size of the system: 50 - 10,000 m³/h

Chlorine dioxide system for the metering of chlorine dioxide with diluted starting chemicals. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDVd can be easily and safely integrated into any water treatment process.

Chlorine Dioxide System Bello Zon CDKd

7.5 – 12,000 g/h chlorine dioxide. Maximum volume of water that can be treated with metering of 0.2 ppm ClO₂, depending on the size of the system: 60,000 m³/h

Chlorine dioxide system for the metering of chlorine dioxide with concentrated starting chemicals. The proven safety concept protects people and the environment. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDKd can be easily and safely integrated into any water treatment process.

NEW

Electrolysis system DULCOLYSE

Output: up to 800 g/h

Efficient production of the highly effective disinfectant DULCOLYT 400 with an exceptionally low chloride and chlorate content. Ideal for particularly sensitive applications in the beverage and food industry, e.g. for the production of baby food. Maximum protection against corrosion and very good cost efficiency.

Chlorine dioxide system Bello Zon CDLb with multiple points of injection

0 – 120 g/h capacity with storage of up to 60 g of chlorine dioxide for peak metering. Max. flow rate at 0.2 ppm ClO₂ metering capacity of 600 m³/h, up to 6 points of injection possible as standard

Flexible solutions for the production and metering of ClO₂ adapted to our customer's tasks, requirements and anticipated pricing.

Motor-driven metering pump sigma Hygienic

Capacity range of the Sigma: 25 – 1,000 l/h, 10 – 4 bar

The hygienic design version of the sigma diaphragm metering pumps is optimised in terms of dead space, features as few gaps as possible and has smooth, wetted surfaces for flexible and easy use in hygienically sensitive applications.