Suggestions

DULCOTEST sensors for ozone

Measuring range 0.02 – 2 mg/l

Measuring ozone in oxidation and disinfection applications: DULCOTEST sensors offer precise, reliable, application-specific measured values in real-time.

Product description

Reliable online measurement of ozone – with DULCOTEST sensors.

To monitor or control clear water, for instance in the disinfection of potable water, there is the tried-and-tested standard ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary sensor type OZE3 mA. The innovative sensor type OZR1 can be used in polluted waters, e.g. raw water for potable water generation, cooling water and wastewater. When monitoring for the absence of ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary, the active carbon filters indicate that ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary is getting through.

Your benefits

  • Two application-optimised sensor types available
  • Precise, real-time amperometric measurement for efficient process control (short response time)
  • Amperometric measuring eliminates interference caused by turbidity or colouration
  • Integrated temperature compensation eliminates interference caused by influence of temperature
  • Diaphragm-covered electrodes for reduced dependence on flow, cross-sensitivities, substances in water and film-forming media
  • Diaphragm-covered measuring electrodes embedded in an electrolyte ensure long service life. This maintains optimum measuring conditions regardless of process conditions

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

  • Type OZE3: Swimming pool water, potable water
  • Type OZR1: Raw water, cooling water, industrial water, process water, wastewater, ozone penetration monitoring

    Technical Details

    • pH range: 4.0 … 11.0 Stability range of ozone
    • Temperature 5 … 40 ºC
    • Pressure max. 1.0 bar
    • Flow 30 … 60 l/h (in DGM or DLG III)
    • Supply voltage 16 … 24 V DC (two-wire)
    • Output signal 4 … 20 mA

    Ozone sensor OZE 3-mA

    Standard sensor for measuring ozone in clear water. For operation on controllers with 4-20 mA input

    Your Benefits

    • Measured variable: Ozone, without cross-sensitivity to chlorine, hydrogen peroxide
    • Diaphragm-covered sensor (encapsulated) minimises faults caused by changing flow or ingredients in the water

    Measured variable

    Ozone (O3)

    Reference method

    DPD4

    pH-range

    4.0…11.0

    Cross sensitivity

    Chlorine dioxide

    Temperature

    5…40 °C

    Max. pressure

    1.0 bar

    Flow

    DGMa, DLG III: 20...60 l/h
    BAMa: 5...100 l/h (depending on design)

    Supply voltage

    16...24 V DC (2-wire)

    Output signal

    4-20 mA ≈ measuring range, temperature-compensated, uncalibrated, not electrically isolated

    Selectivity

    Ozone as against free chlorine, combined chlorine, hydrogen peroxide

    Process integration

    Bypass: open sample water outlet

    Sensor fitting

    DGM, DLG III

    Controllers

    D1C

    Typical applications

    Potable water and swimming pool water.

    Resistance to

    Salts, acids, alkalis. Not surfactants

    Measuring principle, technology

    Amperometric, 2 electrodes, diaphragm-covered

    Measuring range

    Order no.

    OZE 3-mA

    0.02…2.0 mg/l

    792957

    Note: A mounting kit (order no. 815079) is required for initial fitting of the ozone sensors in the in-line probe housing DLG III.

    Ozone sensor OZR 1-mA

    Sensor for measuring and monitoring the absence of ozone, also suitable for use in contaminated water. For operation on controllers with 4-20 mA input

    Your Benefits

    • Measured variable: Ozone, without cross-sensitivity to chlorine, hydrogen peroxide
    • Diaphragm-covered sensor (encapsulated) minimises faults caused by changing flow or ingredients in the water
    • Suitable also for monitoring the absence of ozone (rupture monitoring on filters) and for discontinuous ozone treatment processes
    • Resistance to films of dirt by pore-free diaphragm

    Measured variable

    Ozone (O3)

    Reference method

    DPD4

    pH-range

    4.0…11.0

    Cross sensitivity

    chlorine dioxide, peracetic acid, bromine, bromamine

    Temperature

    5…40 °C

    Max. pressure

    1.0 bar

    Flow

    DGMa, DLG III: 30...60 l/h
    BAMa: 5...100 l/h (depending on design)

    Supply voltage

    16...24 V DC (2-wire)

    Output signal

    4-20 mA ≈ measuring range, temperature-compensated, uncalibrated, not electrically isolated

    Response time t90 after 1 month with 0.00 ppm ozone

    <210 s

    Selectivity

    Non-selective

    Process integration

    Bypass: open sample water outlet

    Sensor fitting

    DGM, DLG III

    Controllers

    D1C, DAC

    Typical applications

    Potable water, swimming pool water, process, service or cooling water, monitoring the ozone breakdown of filters.

    Resistance to

    Salts, acids, alkalis, surfactants, dirt films

    Measuring principle, technology

    Amperometric, 2 electrodes, diaphragm-covered

    Measuring range

    Order no.

    OZR 1-mA-0.5 ppm

    0.01…0.5 mg/l

    1118883

    OZR 1-mA-2 ppm

    0.02…2.0 mg/l

    1051647

    OZR 1-mA-10 ppm

    0.1…10.0 mg/l

    1118925

    Note: A mounting kit (order no. 815079) is required for initial fitting of the ozone sensors in the in-line probe housing DLG III.

    Downloads for DULCOTEST sensors for ozone

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Reliable online measurement of ozone – with DULCOTEST sensors.

    To monitor or control clear water, for instance in the disinfection of potable water, there is the tried-and-tested standard ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary sensor type OZE3 mA. The innovative sensor type OZR1 can be used in polluted waters, e.g. raw water for potable water generation, cooling water and wastewater. When monitoring for the absence of ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary, the active carbon filters indicate that ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary is getting through.

    Your benefits

    • Two application-optimised sensor types available
    • Precise, real-time amperometric measurement for efficient process control (short response time)
    • Amperometric measuring eliminates interference caused by turbidity or colouration
    • Integrated temperature compensation eliminates interference caused by influence of temperature
    • Diaphragm-covered electrodes for reduced dependence on flow, cross-sensitivities, substances in water and film-forming media
    • Diaphragm-covered measuring electrodes embedded in an electrolyte ensure long service life. This maintains optimum measuring conditions regardless of process conditions

    Application

    Technical Data

    Downloads

    Contact us

    Wesley Sutton

    Managing Director, ProMinent Fluid Controls UK Ltd.

    »We are always available to help. Don't hesitate to contact us.«

    +44 1530 560 555  Send request   

    Matching Products

    ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real-time. Can be used in water treatment or industrial process waters with strict requirements.

    more

    Do you wish for a simple controller for water analysis? One that is easy to operate and with which you can freely select between all common measured variables per channel? There is one: our all-rounder DULCOMETER diaLog DACb! What is more, it is Ethernet-/LAN-capable and can be ideally integrated into existing networks.

    more

    The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, wastewater treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.

    more

    The measuring and control system DULCOMARIN 3 is your digital link to the technology of the future. It controls the entire range of swimming pools – from adventure pools to private pools – and is used as a multi-pool system for up to 16 filter circuits.

    more

    Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

    more

    Controller AEGIS II continuously measures and controls the conductivity and biocide concentration to keep pipework and heat exchangers clean.

    more

    Monitoring and treatment of wastewater with DULCOTROL Wastewater – the compact measuring and control system specially designed for applications in municipal and industrial wastewater treatment.

    more

    Monitoring and treatment of potable and similar types of water with DULCOTROL Potable water/F&B – the compact measuring and control system specially designed for water treatment in waterworks and in the food and beverage industry.

    more

    OZONFILT OZMa is synonymous with maximum operational safety and minimal operating costs. The ozone generator is maintenance-free and generates up to 420 g/h of ozone from compressed air.

    more

    OZONFILT OZVb is powerful and compact and is ideal for efficient ozone generation from compressed air in the output range of up to 70 g/h. The turnkey ozone system including mixing equipment offers everything you need for safe and seamless operation.

    more

    OZONFILT Compact OMVb is a complete, ready-to-use system solution for the generation and metering of ozone.

    more

    The motor-driven metering pump alpha is the metering pump for liquid media and the optimum solution for simple applications. Robust, low-noise, chemical-resistant, with precise metering and good suction capacity.

    more

    ProMinent Newsletter - receive latest news, customized for you! subscribe now