Suggestions

Diaphragm Metering Pump Makro TZ

Capacity range of single head pump: 260 – 2,100 l/h, 12 – 4 bar

The modular construction of the diaphragm metering pump Makro TZ with adjustable eccentric drive mechanism and mechanically deflected multi-layer safety diaphragm makes it wonderfully adaptable to the capacity requirements of the respective application.

Product description

Greater safety in continuous operation through mechanically deflected multi-layer safety diaphragm

The diaphragm metering pump Makro TZ (TZMb) has an adjustable eccentric drive mechanism and, together with the Makro TZ plunger metering pump, forms a range of drive mechanisms with stroke lengths of 10 and/or 20 mm. This covers the capacity range from 8 to 2,100 l/h at 320 – 4 bar. A wide range of power end versions is available for use in areas at risk from explosion with ATEX certification.

Your benefits

Excellent process safety and reliability:

  • Patented multi-layer safety diaphragm with integral diaphragm rupture warning system
  • Metering reproducibility is better than ± 2% within the 30 – 100% stroke length range under defined conditions and with correct installation

Excellent flexibility:

  • The modular construction with single and double head versions permits a wide range of applications, with the double head designs being operated in push-pull mode
  • It is possible to combine up to 4 metering units, even with different pump capacities, in multiple pump systems
  • 5 different gear ratios are available
  • Customised designs are available on request

Technical Details

  • Stroke length: 0-10 mm, Rod force: 8,000 N
  • Stroke length adjustment range: 0 – 100%
  • Stroke length adjustment: manually by scaled rotary dial in 0.5% increments (optionally with electric actuator or control drive)
  • Metering reproducibility is better than ± 2% within the 30 – 100% stroke length range under defined conditions and with correct installation. Observe the information in the operating instructions
  • Patented multi-layer safety diaphragm with optical diaphragm rupture display (optionally with electrical diaphragm rupture warning system / warning via a contact)
  • Wetted materials: Polypropylene, PVC, PTFE+25% carbon, stainless steel 1.4571. Special materials are available on request
  • A wide range of power end versions is available: Three-phase or 1-phase AC motor, motors for use in areas at risk from explosion, different flange designs for use of customer-specific motors
  • Degree of protection: IP 55
  • Salt water-resistant, acrylic resin-coated cast aluminium housing
  • For reasons of safety, provide suitable overload protection mechanisms during the installation of all mechanically deflected diaphragm metering pumps
Type TZMbWith 1500 rpm motor at 50 HzWith 1800 rpm motor at 60 HzSuction liftConnection, suction/discharge sideShipping weight PP,NP,TT-SS
 Delivery rate at max. back pressureMax. stroke rateDelivery rate at max. back pressureMax. stroke rate   
bar l/h ml/strokeStrokes/min psi l/h gph (US)Strokes/min m WCG–DNkg
12026012260607217431282864.01 1/2–2546/54
1203401234060961744081081154.01 1/2–2546/54
12043012430601201745161361444.01 1/2–2546/54
12051012510601441746221641734.01 1/2–2546/54
12065012640601801744.01 1/2–2546/54
07043074309972100516136863.52–3250/64
070570757099961006841811153.52–3250/64
0707207720991201008642281443.52–3250/64
0708607860991441001,0322731733.52–3250/64
07107071,070991801003.52–3250/64
040840484019472581,008266863.02 1/4–4056/80
04110041,10019496581,3203491153.02 1/4–4056/80
04140041,400194120581,6804441443.02 1/4–4056/80
04167041,670194144582,0045291733.02 1/4–4056/80
04210042,100194180583.02 1/4–4056/80

Stroke length 10 mm

Plastic material design: max. 10 bar back pressure

The permissible priming pressure on the suction side is approximately 50% of the max. permitted back pressure

Materials in Contact With the Medium

   DN 25 ball valvesDN 32/DN 40 plate valves **
 Liquid endSuction/discharge connectorSealsValve ballsValve seatsSealsValve plates/valve springValve seats
PPTPolypropylenePVDFPTFE Borosilicate glassPTFE PTFE Ceramic/ Hast. C + CTFE**PTFE
PCTPVCPVDFPTFE Borosilicate glassPTFE PTFE Ceramic/ Hast. C + CTFE**PTFE
TTTPTFE with carbonPVDFPTFE CeramicPTFE PTFE Ceramic/ Hast. C + CTFE**PTFE
SSTStainless steel mat. no. 1.4404Stainless steel mat. no. 1.4581PTFE Stainless steel mat. no. 1.4401PTFE PTFE Stainless steel 1.4404/Hast. CPTFE
 Multi-layer safety diaphragms with PTFE coating.
**The valve spring is coated with CTFE (similar to PTFE)
 Special versions on request.

Motor Data

Identity code specification Power supply  Remarks
S3-phase, IP 55220 – 240 V/380 – 420 V
250 – 280 V/440 – 480 V
50 Hz
60 Hz
0.75 kW 
R3-phase, IP 55230 V/400 V50/60 Hz1.5 kWwith PTC, speed adjustment range 1:20 with external fan 1-phase 230 V; 50/60 Hz
V01-phase, IP 55230 V ±5 %50/60 Hz1.1 kWVariable speed motor with integrated frequency converter
L13-phase,
II 2G Ex h IIC T3 Gb X
220 – 240 V/380 – 420 V50 Hz0.75 kW 
L23-phase,
II 2G Ex h IIC T4 Gb X
220 – 240 V/380 – 420 V50 Hz0.75 kWwith PTC, speed control range 1:5
P13-phase,
II 2G Ex h IIC T3 Gb X
250 – 280 V/440 – 480 V60 Hz0.75 kW 
P23-phase,
II 2G Ex h IIC T4 Gb X
250 – 280 V/440 – 480 V60 Hz0.75 kWwith PTC, speed control range 1:5
V23-phase,
II 2G Ex h IIC T4 Gb X
400 V ±10%50/60 Hz1.5 kWEx-variable speed motor with integrated frequency converter

Motor data sheets can be requested for more information. Motors for Sigma basic pumps, special motors or special motor flanges are available on request.

The motors are designed in compliance with the Ecodesign Directive 2009/125/EC.

Information for use in areas at risk from explosion

Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EU in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label corresponds to or is better than the conditions prevalent in the intended field of application.

Downloads for Diaphragm Metering Pump Makro TZ

More in the Download Centre

0 Results
Filter by document type
Application Example / Reference (0)
Brochure / Flyer (0)
Catalogue (0)
Certificate / Declaration (0)
Data Sheet (0)
Drawing / Dimensional Drawing / 3D (0)
Exploded View / Spare Parts (0)
Material Safety Data Sheet (0)
Operating Instructions (0)
Others (0)
Press Release (0)
Publication / Article (0)
Software (0)
Wiring Diagram (0)

Selected filters:

Matching downloads

Sort by A to Z
Load more matches ...
No more matches available!

Leider haben wir kein passendes Suchergebnis gefunden.

Alle Wörter richtig geschrieben?
Mit weniger oder anderen Suchbegriffen erneut versuchen?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

Greater safety in continuous operation through mechanically deflected multi-layer safety diaphragm

The diaphragm metering pump Makro TZ (TZMb) has an adjustable eccentric drive mechanism and, together with the Makro TZ plunger metering pump, forms a range of drive mechanisms with stroke lengths of 10 and/or 20 mm. This covers the capacity range from 8 to 2,100 l/h at 320 – 4 bar. A wide range of power end versions is available for use in areas at risk from explosion with ATEX certification.

Your benefits

Excellent process safety and reliability:

  • Patented multi-layer safety diaphragm with integral diaphragm rupture warning system
  • Metering reproducibility is better than ± 2% within the 30 – 100% stroke length range under defined conditions and with correct installation

Excellent flexibility:

  • The modular construction with single and double head versions permits a wide range of applications, with the double head designs being operated in push-pull mode
  • It is possible to combine up to 4 metering units, even with different pump capacities, in multiple pump systems
  • 5 different gear ratios are available
  • Customised designs are available on request

Application

Technical Data

Downloads

Contact us

Wesley Sutton

Managing Director, ProMinent Fluid Controls UK Ltd.

»We are always available to help. Don't hesitate to contact us.«

+44 1530 560 555  Send request   

Close Form

Your Request

Personal Information


Further product +
Attachment Maximum file size 10 MB
Upload Next file

Personal Information


Please fill in all mandatory fields.
*Mandatory fields

Check and Send


Personal Information:
Salutation
Title
lastname  
First name  
Company
Customer ID
E-mail address
Phone
Street
House no.
City  
Country
Callback Yes

Back

ProMinent Newsletter - customized to your industry. Register now