Suggestions
new

Hydraulic Diaphragm Metering Pump Hydro/ 4 API 675

Capacity range of single head pump: 252 – 1,506 l/h, 40 – 7 bar

The Hydro/ 4 API 675 is an extremely robust hydraulic diaphragm metering pump, which meets the most exacting safety requirements and complies with the requirements of the API 675. It is equipped with e.g. PTFE-multi-layer safety diaphragm with diaphragm monitoring, full-motion drive and automatic bleeding. Its modular construction offers extremely good flexibility in terms of application.

Product description

For flexible metering with excellent process reliability in the medium pressure range.

The Hydro/ 4 API 675 hydraulic diaphragm metering pump (HA4a), together with the Hydro/ 2 and Hydro/ 3 pumps, represents an integrated product range with stroke lengths of 15 and 20 mm. The Hydro API 675 range, equipped with full-motion drive und automatic bleeding covers the capacity range of 4 to 1,506 l/h at 100 – 7 bar. Furthermore this product range complies with the requirements of the API 675.

Your benefits

Excellent process safety and reliability:

  • PTFE multi-layer diaphragm with integral diaphragm monitoring and status signalisation
  • Integrated hydraulic relief and bleed valve
  • Metering reproducibility is better than ±1 % in the 10-100 % stroke volume range under defined conditions and with proper installation

Excellent flexibility:

  • The modular construction with single head, double head and triplex versions permits a wide range of applications, with the double-head versions being operated in the push-pull mode
  • It is possible to combine up to 5 metering units, even with different pump capacities, in multiple pump systems
  • 5 different gear ratios are available

Field of application

  • Oil and gas industry.
  • Volume-proportional metering of chemicals/additives in the treatment of boiler feed water
  • Metering of reactants and catalysts in the chemical industry
  • Level-dependent metering of auxiliary agents in industrial production engineering, for instance hot wax metering in the production of adhesive strips

    Technical Details

    • Stroke length: 20 mm, Rod force: 5.800 N
    • Stroke volume adjustment range: 0 – 100 %
    • Stroke volume adjustment: manually by scaled rotary dial (optionally with electrical actuator or control drive).
    • Metering reproducibility is better than ±1 % in the 10 – 100 % stroke volume range under defined conditions and with proper installation
    • PTFE multi-layer diaphragm incl. electrical diaphragm monitoring with status signalisation via a contact
    • Integrated hydraulic relief and bleed valve
    • Full-motion drive
    • Wetted materials: PVDF, PTFE+25 % carbon, Stainless steel 1.4571, Hastelloy C.
    • A wide range of power end versions is available: Three-phase motors and motors for use in areas at risk from explosion, different flange designs for use of customer-specific motors
    • Degree of protection: IP 55
    • Design in compliance with API 675

    Technical data for HA4a 50 Hz

    Plunger ØMax. pressureMax. pump capacity in l/h at strokes/minTheor. stroke volumeSuction liftConnection on suction/pressure sideShipping weight
      71103136188214    
    mm barl/hl/hl/hl/hl/h ml/stroke m WCG-DN kg
    4040(150) – 154(200) – 211(220) – 24225.13G 1 A – DN 1569
    4025(150) – 160(200) – 219(220) – 25025.13G 1 A – DN 1569
    4016(200) – 225(220) – 25425.13G 1 A – DN 1569
    4010(100) – 125(150) – 166(200) – 228(220) – 25625.13G 1 A – DN 1569
    407(100) – 127(150) – 167(200) – 230(220) – 26125.13G 1 A – DN 1569
    5225(200) – 204(200) – 271(370) – 37242.43G 1 1/2 A – DN 2569
    5216(190) – 205(200) – 274(370) – 37642.43G 1 1/2 A – DN 2569
    5210(180) – 207(200) – 276(370) – 37942.43G 1 1/2 A – DN 2569
    527(180) – 209(200) – 27742.43G 1 1/2 A – DN 2569
    6316(200) – 212(280) – 306(390) – 40162.33G 1 1/2 A – DN 2576
    6310(210) – 215(280) – 311(380) – 40762.33G 1 1/2 A – DN 2576
    637(210) – 216(280) – 312(370) – 40862.33G 1 1/2 A – DN 2576
    8010(280) – 350(420) – 509(580) – 657(890) – 914(1,050) – 1,056100.43G 2 A – DN 3287
    807(270) – 352(420) – 513(590) – 683(890) – 947(1,050) – 1,080100.43G 2 A – DN 3287
    947(350) – 493(500) – 710(820) – 936(1,000) – 1,258(1,400) – 1,440138.73G 2 1/2 A – DN 4096

    The pump selection in accordance with API 675 (adjustment range 1:10) is possible for the rated flow given in the above table.

    Example: with plunger 52 mm, pressure 10 bar and stroke rate 136 H/min gives (200) - 276, i.e. the adjustment range of 1:10 is met for a rated flow between 200 l/h and 276 l/h.

    Version PVDF max. 25 bar

    Pump types marked with "–" do not meet the requirements of the API 675 concerning the adjustment range 1:10

    Technical data for HA4a 60 Hz

    Plunger ØMax. pressureMax. pump capacity in l/h at strokes/minTheor. stroke volumeSuction liftConnection on suction/pressure sideShipping weight
      86124164225    
    mm barl/hl/hl/hl/h ml/stroke m WCG-DN kg
    4040(180) – 200(240) – 25225.13G 1 A – DN 1569
    4025(180) – 185(240) – 26225.13G 1 A – DN 1569
    4016(240) – 26925.13G 1 A – DN 1569
    4010(120) – 150(180) – 200(240) – 27225.13G 1 A – DN 1569
    407(120) – 152(180) – 201(240) – 27525.13G 1 A – DN 1569
    5225(240) – 245(240) – 327(440) – 44542.43G 1 1/2 A – DN 2569
    5216(230) – 246(240) – 330(450) – 45042.43G 1 1/2 A – DN 2569
    5210(220) – 249(240) – 333(450) – 45542.43G 1 1/2 A – DN 2569
    527(220) – 251(240) – 33442.43G 1 1/2 A – DN 2569
    6316(245) – 256(340) – 368(470) – 48362.33G 1 1/2 A – DN 2576
    6310(255) – 260(340) – 374(460) – 49062.33G 1 1/2 A – DN 2576
    637(260) – 262(340) – 375(445) – 49162.33G 1 1/2 A – DN 2576
    8010(340) – 424(505) – 613(700) – 792(1,065) – 1,094100.43G 2 A – DN 3287
    807(330) – 426(505) – 618(711) – 823(1,065) – 1,133100.43G 2 A – DN 3287
    947(430) – 597(600) – 854(990) – 1,128(1,200) – 1,506138.73G 2 1/2 A – DN 4096

    Materials in Contact With the Medium

       DN 25 ball valvesDN 32/DN 40 plate valves
    MaterialDosing headSuction/pressure connectorSealsValve ballsValve seatsSealsValve plates/valve springsValve seats
    SSTStainless steel 1.4404Stainless steel 1.4404PTFEStainless steel 1.4404PTFEPTFEStainless steel 1.4404/ Hast. CPTFE
    PVT*PVDF (polyvinylidene fluoride)PVDF (polyvinylidene fluoride)PTFEGlassPTFEPTFECeramic/E-CTFEPTFE
    HCTHastelloy CHastelloy CPTFEHastelloy CPTFEPTFEHast. C / E-CTFEPTFE
    TTTPTFE + 25 % carbonPVDF (polyvinylidene fluoride)PTFEGlassPTFEPTFECeramic/E-CTFEPTFE

    * not for areas at risk from explosion

    Motor Data

    Identity code specification Power supply  Remarks
    S3-phase, IP 55220 – 240 V/380 – 420 V
    250 – 280 V/440 – 480 V
    50 Hz
    60 Hz
    1.1 kW 
    T3-phase, IP 55220 – 240 V/380 – 420 V
    265 – 280 V/440 – 480 V
    50 Hz
    60 Hz
    1.1 kWwith PTC, speed control range 1:5
    R3-phase, IP 55230 V/400 V50/60 Hz1.5 kWwith PTC, speed control range 1:20, with external fan 1-phase 230 V; 50/60 Hz
    V03-phase, IP 55400 V50/60 Hz1.5 kWVariable speed motor with integrated frequency converter
    L13-phase,
    II 2G Ex e II T3
    220 – 240 V/380 – 420 V50 Hz1.1 kW 
    L23-phase,
    II 2G Ex de IIC T4 Gb
    220 – 240 V/380 – 420 V50 Hz1.1 kWwith PTC, speed control range 1:5
    P13-phase,
    II 2G Ex e II T3
    254 – 277 V/440 – 480 V60 Hz1.1 kW 
    P23-phase,
    II 2G Ex de IIC T4
    254 – 277 V/440 – 480 V60 Hz1.1 kWwith PTC, speed control range 1:5
    V23-phase,
    II 2G Ex de IIC T4
    400 V ±10 %50/60 Hz1.5 kWEx-variable speed motor with integrated frequency converter

    Motor data sheets can be requested for more information. Special motors or special motor flanges are available on request.

    The motors are designed in compliance with the Ecodesign Directive 2009/125/EC.

    Information for use in areas at risk from explosion

    Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EU in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label corresponds to or is better than the conditions prevalent in the intended field of application.

    Downloads for Hydraulic Diaphragm Metering Pump Hydro/ 4 API 675

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by A to Z
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    For flexible metering with excellent process reliability in the medium pressure range.

    The Hydro/ 4 API 675 hydraulic diaphragm metering pump (HA4a), together with the Hydro/ 2 and Hydro/ 3 pumps, represents an integrated product range with stroke lengths of 15 and 20 mm. The Hydro API 675 range, equipped with full-motion drive und automatic bleeding covers the capacity range of 4 to 1,506 l/h at 100 – 7 bar. Furthermore this product range complies with the requirements of the API 675.

    Your benefits

    Excellent process safety and reliability:

    • PTFE multi-layer diaphragm with integral diaphragm monitoring and status signalisation
    • Integrated hydraulic relief and bleed valve
    • Metering reproducibility is better than ±1 % in the 10-100 % stroke volume range under defined conditions and with proper installation

    Excellent flexibility:

    • The modular construction with single head, double head and triplex versions permits a wide range of applications, with the double-head versions being operated in the push-pull mode
    • It is possible to combine up to 5 metering units, even with different pump capacities, in multiple pump systems
    • 5 different gear ratios are available

    Application

    Technical Data

    Downloads

    Contact us

    Wesley Sutton

    Managing Director, ProMinent Fluid Controls UK Ltd.

    »We are always available to help. Don't hesitate to contact us.«

    +44 1530 560 555  Send request   

    ProMinent Newsletter - customized to your industry. Register now