Automatic chlorine gas metering system DULCO®Vaq
Capacity: 12 g/h - 15 kg/h
The chlorine gas metering system DULCO®Vaq type PM 3610 C for automatically controlled metering of chlorine gas. Its simple operation offers safety and precision in accordance with the current state of technology and in line with DIN standards.
Maximum safety and precision in chlorine gas metering.
The automatic chlorine gas metering system DULCO®Vaq type PM 3610 C is fitted in the vacuum system between the vacuum controller and injector. The chlorine gas flow is automatically adjusted. A stepper motor controls an ultra-precise V-nozzle, enabling a linear control characteristic over a wide range. Control is by means of external control, such as analogue signals, 0/2 - 10 V, Modbus or by manually setting on the device’s keypad. Opening and operating statuses are signalled externally by analogue and digital outputs and by LEDs on the device. In the event of power failure, the valve closes automatically, although mechanical manual operation is possible. The flow of chlorine gas is displayed on a long-scale flow meter and is held constant by the integrated differential pressure regulator even with fluctuating pressure conditions.
Manometers display both the injector vacuum as well as the operating vacuum.
The entire system is ready-wired and mounted on a PVC panel and protected by an appropriate cover.
- Automatic chlorine gas metering
- Plug and Play
- DIN 19606-compliant
- Panel-mounted system
- Wide-ranging controllable motorised control valve
- Functional cover hood
Field of application
- Potable water
- Swimming pool
- Waste water
- Cooling water
Full-vacuum chlorine gas metering unit type PM 3610 C including:
- motorised control valve PM 3531 C, capacity up to 15 kg/h with C-control nozzle with 1:20 controllability, with automatic proportional metering via a 4-20 mA signal.
- LED indicator for the opening status
- 5-point calibration
- Simple, manual or automatic operation
- Potential-free contact for error signalling
- Long-scale flow meter (165 mm) with a precision of ± 4 %
- Differential pressure controller in accordance with DIN 19606
- Manometer to display the operating vacuum
- Manometer to display the injector vacuum
- Non-return valve on the outlet side
- Power supply: 230 VAC 50/60 Hz
- Degree of protection: IP67
- Pipework: PVC-U PN16
- Vacuum switch (vacuum too high / vacuum too low) (-HL)
|Dimensions:||896 x 396 x 210 mm|
|Vacuum connections:||up to 4 kg/h d8/d10|
from 10 kg/h d12/16
Chlorine gas metering system PM3610C/3UDP
Chlorine gas metering system PM3610C/4UDP
Chlorine gas metering system PM3610C/5UDP
Chlorine gas metering system PM3610C/6UDP
Chlorine gas metering system PM3610C/7UDP
Chlorine gas metering system PM3610C/8UDP
Chlorine gas metering system PM3610C/9UDP
Chlorine gas metering system PM3610C/15UDP
Downloads for Automatic chlorine gas metering system DULCO®Vaq
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.