Suggestions

Solenoid-Driven Metering Pump gamma/ XL

Feed rate of product range 4 ml/h – 80 l/h; 25 – 2 bar

The gamma/ XL is a smart, connectible solenoid-driven metering pump that is setting new standards in terms of productivity, reliability and cost-effectiveness.

Product description

gamma/ XL – large output, great features

The new solenoid-driven metering pump gamma/ XL extends the capacity range of the proven gamma/ X to 80 l/h. In addition to the familiar relays and bus interfaces, the gamma/ XL provides a socket with 3 more configurable inputs and outputs. This allows the gamma/ XL to network with all common systems, devices and platforms. Like the gamma/ X, the gamma/ XL has an intuitive operating concept. The pump is adjusted using a click wheel and 4 additional operating keys. Pressure detection without wetted parts ensures maximum operational safety. Hydraulic error statuses, like “Gas in the dosing head”, “Overpressure” and “No pressure” can be detected.

Pressure fluctuations in the system are detected and compensated for, achieving a high level of dosing precision and reducing chemical consumption to the required level.

The last 300 events are retrospectively saved in the integral logbook, which permits rapid analysis of the cause and troubleshooting if required.

Deviations from the metering volume or hydraulic fault statuses are immediately detected and corrected by the gamma/ XL. The pump’s operating menu includes ordering information for the wear parts required.

Designed as a smart product, it can also be connected to our web-based IIoT platform. The user can use this to monitor his metering process in real-time, avoid downtimes and generate reports fully automatically.

Your benefits

  • Simple adjustment of the metering rate directly in l/h
  • Integrated pressure measurement and display for greater safety during commissioning and in the process
  • Control range for metering rate 1:40,000
  • Direct input of the required and desired concentration in concentration mode with volume-proportional metering tasks
  • Virtually wear-free solenoid drive, overload-proof and economical
  • Suitable for continuous micro-metering from approx. 4 ml/h, thanks to the regulated solenoid drive
  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    gamma/ X - Family - Module 1

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    gamma/ X - Family - Module 2

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    gamma/ X - Family - Module 3

  • The use of cookies is required to play this video. Here you can adjust your cookie selection to watch this video.

    gamma/ X - Family - Module 4

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

  • Chemical distributors
  • Systems engineering
  • Food and beverage industry
  • Potable water
  • Wastewater
  • Chemical industry
  • Electroplating
  • Bottling processes, e.g. ink cartridges or highlighter pens
  • With an integrated process timer, suitable as a control unit for simple processes, e.g. biocide metering in cooling water
  • All industrial applications, either as a stand-alone unit or integrated in a complete system

    Technical Details

    • Illuminated 3” LCD and 3-LED display for operating, warning and error messages, visible from all sides
    • In non-automatic mode, stroke rate setting 1 stroke/h – 12,000 strokes/h, stroke length electronically continuously variable 0 – 100%, recommended 30 – 100%
    • Factor with external contact control 99:1 – 1:99
    • In automatic mode, an even finer setting in ml
    • Batch operation with max. 99.99 l or 99,999 strokes/start pulse
    • Connector for 2-stage level switch
    • 3 additional ports, switched as digital inputs or outputs
    • Optional 0/4 – 20 mA output for remote transmission of actual dosing rate and error messages
    • Optional relay module with 1 x switch-over contact, 230 V – 6 A
    • Optional relay module with 2 x On, 24 V – 100 mA

    Technical Data

    Pump type

    Pump capacity at max. back pressure

    Theor. stroke volume

    Max. stroke rate

    Nominal diameter

    Suction lift*

    Shipping weight

    NPE, NPB, PVT

    SS

    bar

    l/h

    ml/stroke

    Strokes/min

    m WC

    kg

    kg

    * Suction lift with a filled dosing head and filled suction line, with a self-bleeding dosing head with air in the suction line.

    ** 25 bar variant only available with a NP or SS dosing head material.

    *** With stainless steel design, 6 mm connector width.

    Metering pumps with non-self-bleeding dosing head

    GXLa 2508

    25 **

    7.5

    0.63

    200

    8 x 4 mm ***

    5

    10

    11

    GXLa 1608

    16

    7.8

    0.65

    200

    8 x 5 mm ***

    5

    10

    11

    GXLa 1612

    16

    12

    1

    200

    8 x 5 mm

    6

    10

    11

    GXLa 1020

    10

    19.6

    1.63

    200

    12 x 9 mm

    5

    10

    11

    GXLa 0730

    7

    29.4

    2.4

    200

    12 x 9 mm

    5

    10

    11

    GXLa 0450

    4

    49

    4.08

    200

    G 3/4 - DN 10

    3

    10

    11

    GXLa 0280

    2

    78.5

    6.54

    200

    G 3/4 - DN 10

    2

    10

    11

    Metering pumps with self-degassing dosing head (dosing head design 7)

    GXLa 1608

    10

    7

    0.6

    200

    8 x 5 mm

    1.8

    10

    -

    GXLa 1612

    10

    10

    0.8

    200

    8 x 5 mm

    1.8

    10

    -

    GXLa 1020

    10

    15

    1.25

    200

    12 x 9 mm

    1.8

    10

    -

    GXLa 0730

    7

    27.5

    2.3

    200

    12 x 9 mm

    1.8

    10

    -

    gamma/ XL metering pumps with dosing heads for higher-viscosity media have a 10 – 20 % lower capacity and are not self-priming with all feed chemicals. G 3/4 - DN 10 connector with d 16 - DN 10 hose nozzle.

    All data calculated with water at 20 °C.

    Materials in Contact with the Medium

    Identity code of material

    Dosing head

    Connection on suction/discharge side

    Ball seat

    Seals

    Balls

    PVT

    PVDF

    PVDF

    PVDF

    PTFE

    Ceramic

    NPT

    Clear acrylic

    PVDF

    PVDF

    PTFE

    Ceramic

    NPE

    Clear acrylic

    PVC

    EPDM

    EPDM

    Ceramic

    NPB

    Clear acrylic

    PVC

    FKM A

    FKM A

    Ceramic

    SST (8 - 12 mm)

    Stainless steel 1.4404

    Stainless steel 1.4404

    Ceramic

    PTFE

    Ceramic

    SST (DN 10)

    Stainless steel 1.4404

    Stainless steel 1.4404

    Carbon-filled PTFE

    PTFE

    Ceramic

    Connectors

    Plastic8 – 12 mmHose squeeze connector
     DN 10d16 DN 10 hose sleeve
    Stainless steel6 – 12 mmSwagelok system
     DN 10Rp 3/8 insert

    Metering diaphragm with PTFE coating.

    Repeatability of metering ±1% when used in accordance with the operating instructions.

    Permissible ambient temperature –10 °C to 45 °C.

    Mean power consumption 78 W.

    Degree of protection IP 66, insulation class F.

    Scope of supply
    Metering pump with mains cable, connector kit for hose/tube connector as per table.

    Downloads for Solenoid-Driven Metering Pump gamma/ XL

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    gamma/ XL – large output, great features

    The new solenoid-driven metering pump gamma/ XL extends the capacity range of the proven gamma/ X to 80 l/h. In addition to the familiar relays and bus interfaces, the gamma/ XL provides a socket with 3 more configurable inputs and outputs. This allows the gamma/ XL to network with all common systems, devices and platforms. Like the gamma/ X, the gamma/ XL has an intuitive operating concept. The pump is adjusted using a click wheel and 4 additional operating keys. Pressure detection without wetted parts ensures maximum operational safety. Hydraulic error statuses, like “Gas in the dosing head”, “Overpressure” and “No pressure” can be detected.

    Pressure fluctuations in the system are detected and compensated for, achieving a high level of dosing precision and reducing chemical consumption to the required level.

    The last 300 events are retrospectively saved in the integral logbook, which permits rapid analysis of the cause and troubleshooting if required.

    Deviations from the metering volume or hydraulic fault statuses are immediately detected and corrected by the gamma/ XL. The pump’s operating menu includes ordering information for the wear parts required.

    Designed as a smart product, it can also be connected to our web-based IIoT platform. The user can use this to monitor his metering process in real-time, avoid downtimes and generate reports fully automatically.

    Your benefits

    • Simple adjustment of the metering rate directly in l/h
    • Integrated pressure measurement and display for greater safety during commissioning and in the process
    • Control range for metering rate 1:40,000
    • Direct input of the required and desired concentration in concentration mode with volume-proportional metering tasks
    • Virtually wear-free solenoid drive, overload-proof and economical
    • Suitable for continuous micro-metering from approx. 4 ml/h, thanks to the regulated solenoid drive

    Video

    Application

    Technical Data

    Downloads

    Contact us

    Wesley Sutton

    Managing Director, ProMinent Fluid Controls UK Ltd.

    »We are always available to help. Don't hesitate to contact us.«

    +44 1530 560 555  Send request   

    Spare Parts and Accessories

    Matching Products

    • The DULCONNEX Gateway safely and reliably transfers the data of all products supported as standard to the DULCONNEX Cloud

      more

    ProMinent Newsletter - receive latest news, customized for you! subscribe now