Suggestions
Products
See all results for products
NEW

DULCOTROL EPCa Measurement and Control Unit for DULCOEYE Sensors

DULCOEYE LT: Fine turbidity
DULCOEYE SAC: SAK, UVT, COD, BOD, TOC, and DOC

The DULCOTROL EPCa measurement and control unit for DULCOEYE sensors combines sensor technology, measuring and control technology, and optional accessories on a pre-assembled panel. This solution enables quick installation, easy commissioning, and reliable process monitoring in water treatment.

Product description

Seamlessly integrated smart sensor technology: the DULCOTROL EPCa measurement and control unit for DULCOEYE sensors.

The DULCOTROL EPCa measurement and control unit for DULCOEYE sensors is ProMinent’s pre-assembled, flexible solution for continuous online measurement in water. It serves as the common basis for the sensors in the DULCOEYE family, as the various DULCOEYE measurement parameters can be configured using the plate—for example, DULCOEYE LT for fine turbidity measurement or DULCOEYE SAC for determining measured values such as SAK, UVT, COD, BOD, TOC, and DOC.

The panel comes factory-equipped with the DULCOMETER diaLog C Controller and can optionally be expanded with suitable measurement accessories such as various flow cells, calibration When a metering pump has been installed, the capacity in litres per hour has to be determined under ... more in the glossary vessels, and solid-state verifications. Digital sensors are automatically recognized—plug-and-play instead of time-consuming configuration during commissioning or sensor replacement.

The standardized panel mounting significantly reduces planning, installation, and training efforts: Operators who use multiple DULCOEYE sensors or plan to expand their measuring point in the future benefit from a consistent operating concept, compatible accessories, and easy access to replacement parts.

The compact, robust design ensures reliable installation with high operational reliability and is designed for continuous use in drinking water and wastewater treatment, industrial process water applications, and water monitoring.

Your benefits

  • A platform for all DULCOEYE sensors
    Flexible configuration with current and future DULCOEYE sensors on the same board solution.
  • Precise, laboratory-quality measurement results
    DIN-compliant sensors with long-lasting light sources for precise and robust measurements.
  • Pre-assembled and ready for immediate use
    Includes Controllers—simple installation without complex piping.
  • Digital sensor detection & quick commissioning
    Automatic detection of the connected DULCOEYE sensor—plug-and-play instead of time-consuming configuration.
  • Flexibly expandable
    Optionally configurable with compatible measurement accessories, e.g., flow cells, calibration vessels, and solid-state verification.
  • Compact, space-saving design
    Easy wall mounting and clear layout of all components.

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

  • DULCOEYE LT sensor for Fine Turbidity
    • Fresh Water
    • Well water and raw water
    • Surface water from lakes, rivers, etc.
    • Drinking water treatment
    • Treated waste water (e.g., Stage 4 of a clarification plant|sewage plant)
    • Distribution networks
    • Industrial process water
    • Pool water, swimming pool water
    • Service water treatment
    • Filter monitoring and backwashing
    • Fruit and vegetable washing
  • DULCOEYE SAC sensor for organic contamination
    • Drinking water and raw water treatment: Feed and outlet of water treatment plants to monitor purification performance
    • Before and after the 4th treatment stage
    • Water monitoring: groundwater, surface water, and landfill leachate to monitor organic contamination from aromatics and humic substances
    • Municipal and industrial wastewater treatment
    • Aquaculture

    Waste Water Treatment

    Very low-impact treatment for waste water

    Our water treatment technology delivers thorough yet environmentally friendly waste water treatment. What's more, with precisely metered additives and optimised processes, you also save money.
    more

    Swimming pool water treatment

    Modern disinfection processes enhance the bathing experience

    Modern disinfection processes coupled with state-of-the-art measuring and control technology from ProMinent enhance the bathing experience. Our UV and ozone systems make swimming pool water hygienically pure. In addition to conventional disinfection with chlorine, unpleasant smells can also be avoided, for example.
    more

    Potable water treatment

    Outstanding water quality in line with global WHO standards

    ProMinent uses powerful systems and components to ensure potable water with high standards of hygiene. Our solutions are either pre-assembled ready for operation or can be configured individually.
    more

    Technical Details

    • Compatible with DULCOEYE sensors
    • Pre-assembled at the factory with the DULCOMETER diaLog C Controller
    • Modular construction, optionally expandable with measurement accessories
    • Compact design for wall mounting
    • Digital interface (RS-485) for sensor communication

    Technical Data DULCOEYE SAC

    Measured variable

    Absorption

    Measurement Parameters

    SAK254, UVT254, CSBeq, BSBeq, TOCeq, DOCeq, Turbidity

    Measuring range

    Design with 2 mm optical path length:
    SAK254 0…700 1/m | UVT254 0…100% | CSBeq 0…1,000 mg/l |
    BSBeq 0…1,000 mg/l | TOCeq 0…500 mg/l | DOCeq 0…500 mg/l |
    Turbidity 0…2,500 FAU
    Design with 5 mm optical path length:
    SAK254 0…400 1/m | UVT254 0…100% | CSBeq 0…500 mg/l |
    BSBeq 0…500 mg/l | TOCeq 0…250 mg/l | DOCeq 0…250 mg/l |
    Turbidity 0…1,000 FAU
    Design with 20 mm optical path length:
    SAK254 0…100 1/m | UVT254 0…100% | CSBeq 0…100 mg/l |
    BSBeq 0…100 mg/l | TOCeq 0…50 mg/l | DOCeq 0…50 mg/l |
    Turbidity 0…250 FAU

    Measuring principle, technology

    Transmission

    Light source

    254 nm UV LED, LED for turbidity compensation at 550 nm

    Accuracy

    Design:
    optical path length 2 mm: ± 0.5% of full scale (FS)
    optical path length 5 mm: ± 0.5% of full scale (FS)
    optical path length 20 mm: ± 1.5% of full scale (FS)
    turbidity: ± 2% of full scale (FS)

    Resolution

    0.01 [1/m; %; mg/l]

    Repeatability

    Parameters: ± 0.5% of full scale (FS, KHP)
    Turbidity: ± 1% of full scale (FS)

    Response time sensor t90

    5 s (without signal notification; adjustable in the controller)

    Storage temperature

    -10…50 °C

    Enclosure rating

    IP 68 (< 10 m)

    Operating temperature

    0…45 °C

    Flow

    20…30 l/h

    Operating pressure

    1 – 3 bar

    Supply voltage

    11...30 V DC

    Power uptake

    3.2 W

    Communication interface

    RS-485

    Controllers

    diaLog C

    Dimensions

    Optical path length design options:
    2 mm: 247.5 mm height (without cable), 55 mm (Ø)
    5 mm: 250.5 mm height (without cable), 55 mm (Ø)
    20 mm: 265.5 mm height (without cable), 55 mm (Ø)

    Weight

    Optical path length design versions:
    2 mm: 1.873 g + cable
    5 mm: 1.793 g + cable
    20 mm: 2.013 g + cable

    Technical Data DULCOEYE LT

    Measuring range

    0…100 NTU

    Measuring principle, technology

    nephelometric (90° light scattering according to DIN EN ISO 7027-1)

    Unit of measurement

    NTU, FNU, FTU

    Light source

    860 nm infrared LED

    Accuracy

    2 % ± 0.02 NTU whichever is greater

    Repeatability

    < 0,5 %

    Resolution

    0.001 NTU

    Response time sensor t90

    5 s

    Supply voltage

    11...30 V DC

    Calibration

    1-point or 2-point calibration

    Operating temperature

    0…45 °C

    Storage temperature

    -10…50 °C

    Ambient conditions

    Indoor installation (no direct sunlight), maximum 90 % relative air humidity (non-condensing)

    Digital output

    RS-485

    Housing material

    316 L stainless steel

    Enclosure rating

    IP 65

    Weight

    approx. 1,000 g + cable

    Operating pressure

    1 – 3 bar

    Flow

    20…30 l/h

    Controllers

    diaLog C

    Downloads for DULCOTROL EPCa Measurement and Control Unit for DULCOEYE Sensors

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)
    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Seamlessly integrated smart sensor technology: the DULCOTROL EPCa measurement and control unit for DULCOEYE sensors.

    The DULCOTROL EPCa measurement and control unit for DULCOEYE sensors is ProMinent’s pre-assembled, flexible solution for continuous online measurement in water. It serves as the common basis for the sensors in the DULCOEYE family, as the various DULCOEYE measurement parameters can be configured using the plate—for example, DULCOEYE LT for fine turbidity measurement or DULCOEYE SAC for determining measured values such as SAK, UVT, COD, BOD, TOC, and DOC.

    The panel comes factory-equipped with the DULCOMETER diaLog C Controller and can optionally be expanded with suitable measurement accessories such as various flow cells, calibration When a metering pump has been installed, the capacity in litres per hour has to be determined under ... more in the glossary vessels, and solid-state verifications. Digital sensors are automatically recognized—plug-and-play instead of time-consuming configuration during commissioning or sensor replacement.

    The standardized panel mounting significantly reduces planning, installation, and training efforts: Operators who use multiple DULCOEYE sensors or plan to expand their measuring point in the future benefit from a consistent operating concept, compatible accessories, and easy access to replacement parts.

    The compact, robust design ensures reliable installation with high operational reliability and is designed for continuous use in drinking water and wastewater treatment, industrial process water applications, and water monitoring.

    Your benefits

    • A platform for all DULCOEYE sensors
      Flexible configuration with current and future DULCOEYE sensors on the same board solution.
    • Precise, laboratory-quality measurement results
      DIN-compliant sensors with long-lasting light sources for precise and robust measurements.
    • Pre-assembled and ready for immediate use
      Includes Controllers—simple installation without complex piping.
    • Digital sensor detection & quick commissioning
      Automatic detection of the connected DULCOEYE sensor—plug-and-play instead of time-consuming configuration.
    • Flexibly expandable
      Optionally configurable with compatible measurement accessories, e.g., flow cells, calibration vessels, and solid-state verification.
    • Compact, space-saving design
      Easy wall mounting and clear layout of all components.

    Application

    Technical Data

    Downloads

    Contact us

    Wesley Sutton

    Managing Director, ProMinent Fluid Controls UK Ltd.

    +44 1530 560 555   
    Send request    

    »We are always available to help. Don't hesitate to contact us.«

    +44 1530 560 555  Send request   

    Matching Products

    DULCOEYE sensor for low turbidity

    Ideal for applications up to 100 NTU

    The new DULCOEYE turbidity sensor from ProMinent is a high-precision solution for the optical measurement of low turbidity. With state-of-the-art technology and intelligent design, this sensor simplifies liquid analysis.

    more

    DULCOTEST sensors for ozone

    Measuring range 0.02 – 2 mg/l

    Measuring ozone in oxidation and disinfection applications: DULCOTEST sensors offer precise, reliable, application-specific measured values in real-time.

    more
    NEW

    Controller DULCOMETER diaLog C

    The DULCOMETER diaLog C sets new standards in measuring and control technology. Whether as a transmitter or 2-side controller (PID) with one channel - it is ideal for use in industrial water treatment. Thanks to its intuitive operation and digital networking, it is smartly integrated into your processes.

    more

    Controller DULCOMETER diaLog X

    The DULCOMETER diaLog X multi-parameter controller ensures that complex water treatment systems are operated as efficiently as possible. The controller is highly flexible and suitable for many sensor parameters.

    more

    Sensor bypass armature Modular BAMa

    Up to 9 functional modules can be freely configured in a single fitting.

    The modular bypass armature BAMa accommodates ProMinent sensors for water treatment. The armature is simply installed in a bypass of the main process line. It is available in various variants, each perfectly designed for special water treatment applications – from drinking water, water for pool & wellness to industrial water.

    more
    +44 1530 560 555
    Request
    Newsletter
    WebShop
    Call
    Request
    Newsletter
    WebShop