Suggestions

Disinfection using Chlorine and Electrolysis in Public Swimming Pools

Attractive alternative to traditional chlorine disinfection

Various procedures are used to disinfect swimming pool water. Alongside the conventional metering of chlorine, using cost-effective and environmentally-friendly electrolysis systems brings numerous benefits for operators.

Requirements - Disinfection using Chlorine and Electrolysis in Public Swimming Pools

 

Advanced disinfection

In accordance with DIN 19643, chlorine gas, calcium hypochlorite and sodium hypochlorite (sodium-calcium hypochlorite) are approved for disinfection purposes. The most commonly used solution is chlorine gas, but this brings with it a certain potential danger.

ProMinent supplies ready mounted, automatic measurement, control and metering systems to accurately meter the amounts of chemicals needed. These systems continuously measure all hygiene parameters and therefore guarantee consistently superlative water quality in public pools.

Electrolysis Chlorine and sodium hydroxide are produced in-situ in electrolysis by passing an electric ... more in the glossary systems are particularly attractive alternatives for safe disinfection: by producing the disinfectant on-site, the systems remove the need to store and handle dangerous chemicals. The minimal use of chemicals also ensures environmentally-sound operation and reduced operating costs. ProMinent has a cost-effective solution for producing hygienically pure swimming pool water and guaranteeing maximum operating reliability for every size of swimming pool.

Downloads for Disinfection using Chlorine and Electrolysis in Public Swimming Pools

More in the Download Centre

0 Results
Filter by document type
Application Example / Reference (0)
Brochure / Flyer (0)
Catalogue (0)
Certificate / Declaration (0)
Data Sheet (0)
Drawing / Dimensional Drawing / 3D (0)
Exploded View / Spare Parts (0)
Material Safety Data Sheet (0)
Operating Instructions (0)
Others (0)
Press Release (0)
Publication / Article (0)
Software (0)
Wiring Diagram (0)

Selected filters:

Matching downloads

Sort by Document type
Load more matches ...
No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

 

Advanced disinfection

In accordance with DIN 19643, chlorine gas, calcium hypochlorite and sodium hypochlorite (sodium-calcium hypochlorite) are approved for disinfection purposes. The most commonly used solution is chlorine gas, but this brings with it a certain potential danger.

ProMinent supplies ready mounted, automatic measurement, control and metering systems to accurately meter the amounts of chemicals needed. These systems continuously measure all hygiene parameters and therefore guarantee consistently superlative water quality in public pools.

Electrolysis Chlorine and sodium hydroxide are produced in-situ in electrolysis by passing an electric ... more in the glossary systems are particularly attractive alternatives for safe disinfection: by producing the disinfectant on-site, the systems remove the need to store and handle dangerous chemicals. The minimal use of chemicals also ensures environmentally-sound operation and reduced operating costs. ProMinent has a cost-effective solution for producing hygienically pure swimming pool water and guaranteeing maximum operating reliability for every size of swimming pool.

Downloads

Suitable products - Disinfection using Chlorine and Electrolysis in Public Swimming Pools

Ultra-pure or low-chloride and low-chlorate sodium hypochlorite requires specialist plant engineering. The electrolysis system CHLORINSITU III is the solution for you.

more

Generation of sodium hypochlorite solution for smaller swimming pools and pools.

more

Electrolysis systems of type CHLORINSITU V Plus generate ultra-pure chlorine gas directly on site and only need salt, water and electricity to do so. Peaks in demand can be covered by this system (Plus system). They are especially well suited to systems for disinfecting potable water, wastewater, process water and water in swimming pools and cooling towers.

more

CHLORINSITU IIa is a compact on-site electrolysis system for the production of a low-chlorate hypochlorite solution from salt and electricity. Key advantages are its simple process management and excellent system safety through integrated ventilation and bleeding.

more

CHLORINSITU IIa XL is the tubular cell electrolysis system for on-site production of large quantities of hypochlorite. Users cannot fail to be impressed by its ease of operation and outstanding efficiency combined with optimum process stability for the reliable disinfection of large volumetric flows.

more

Electrolysis systems of type CHLORINSITU V take the place of the chlorine gas system in the swimming pool and only need salt, water and electricity to do so.

more

Contact us

Wesley Sutton

Managing Director, ProMinent Fluid Controls UK Ltd.

»We are always available to help. Don't hesitate to contact us.«

+44 1530 560 555  Send request   

News and Events

ProMinent Newsletter - receive latest news, customized for you! subscribe now