United Kingdom
Quicksearch
Home ProMinent.com Sitemap Downloads Contact ProMinent Worldwide
Applications Industry SolutionsProductsServiceInfo-CenterCompany
Newsletter
Home > Applications > CIP
Applications
Overview
Waste Water
Utility Water
Boiler-Feed Water
Cooling Water
Disinfection
CIP
Dosing of Chemicals
Legionella Prevention
pH Adjustment
References
CIP - Cleaning In Place

CIP - Cleaning In Place


There is CIP (Cleaning In Place) and SIP (Sanitizing in Place) equipment in almost every operational drinks or foods company. These methods are used to clean and disinfect production and filling equipment and therefore are particularly important with regard to the shelf life and safety of food.

Equally high are the demands on the technology used, the safety of the processes and how well good standards of hygiene can be produced again and again. ProMinent can meet these requirements through tried and tested quality and, thanks to years of experience, can provide you with options to optimize costs and processes.

Online Measurement and Control during the CIP Cycle

The ProMinent product portfolio offers dosing systems, probes and control units for pH, conductivity, chlorine, chlorine dioxide, ozone, chlorite, bromine, fluorine, dissolved oxygen, hydrogen peroxide and PES. The measured values can be passed directly or via a bus system to the available CIP control. In addition the control units can take over control of the dosing pumps. 

Dosing chemicals

The pumps for dosing chemicals can be pre-mounted on dosing consoles made from stainless steel or chemical-resistant plastics. The consoles have a permanently attached drip tray made from the same material and, depending on requirement, components such as backpressure valves, pulsation dampeners, manometers, valves, rinsing device etc. For pre-storage of chemicals, our own manufactured plastic tanks are used. Depending on requirement-, single-walled small-volume tanks are available or welded large-volume tanks with bund to comply with WHG.

Disinfection and Sterilisation of Rinsing Water with Chlorine Dioxide

Whithout doubt, chlorine dioxide counts among the optimum solutions for this application. After ozone, chlorine dioxide is the most effective and quickest way of killing bacteria. Chlorine dioxide can be easily and quickly used for rinsing and is permitted for use in the treatment of drinking water and without any danger of possible interactions in the rinsing water.

For disinfecting, a concentration of approximately 1.5 to 2% is normally used. For rinsing, decontaminated water of drinking quality with less than 0.2 ppm, chlorine dioxide, is used. This process is achieved using the ProMinent concept for the production and distribution of chlorine dioxide together with the appropriate ProMinent control units, probes and dosing pumps.

Contact Us!
Advice, Enquiries and Service
Request for Information Material
Your Contacts Worldwide
References

Hygienic bottling of mineral water

Related Products

Chlorine dioxide plants Bello Zon® CDV and CDK

Dosing Systems

Measuring, Control and Sensor Technology

Complete Solutions for the Beverage Industry
UK Links
Proshield Ltd
Imprint © 2008 Copyright ProMinent. All rights reserved.