The BONa range includes ozone production equipment with a performance spectrum of 80 – 720 g ozone / h. The compact design of this range with its integrated gas conditioning application are distinctive features. BONa ozone plants work using positive suction pressure and are therefore particularly reliable when it comes to operation.
Advantages
- High operational reliability: positive suction pressure guarantees the greatest possible protection against ozone gas leaks
- Simple operation thanks to its stored programme control and clearly visible display and operating control panel
- Minimal operating costs: Load-dependent regeneration of air supply and therefore considerably reduced coolant requirement
Application Areas
-
Treatment of swimming pool water (disinfecting breakdown of trihalomethanes and chloramines)
-
Treatment of drinking water (oxidation of metals such as iron, manganese, arsenic and organic contaminants)
-
Cooling water disinfection
-
Water preparation in zoological pools and aquariums
-
Beverage industry: removal of iron and manganese from drinking water, microbiological protection during filling
Features
- Ozone-producing modules made from stainless steel
- Automatic, electronic identification of excess current linked to safety cut-out even with part-load operation
- Stored programmed processor control, which controls all processes and issues fault reports if there is a malfunction
- Easy-to-read display and operating panel: the ozone production process is shown in a flow diagram. LED displays keep the operator informed about the particular operating status and adjusted values e.g. volume flow (gas application), primary voltage and current are displayed.
- Full control including for the injector booster pump
- Ozone producers (ozone generators) which have been optimised for minimum power consumption Performance requirement 18.7 Wh/g
- Continuous adjustment of ozone production to requirement using a regulating transformer, which if required is equipped with an electrical actuator
- Control for the pressure booster pump and protection are already integrated into the electrical cabinet
- Easy-to-read display with operational and malfunction lights together with digital measuring instruments, integrated into one display panel
- Operation with positive suction pressure guarantees protection from ozone gas leaks
- Preparation of air using high-efficient adsorber drier. Thermostatically controlled regeneration ensures an optimum dew-point
- BonoZon plants comply with the German Standards for Ozone Production Plants DIN 19627 and have the TÜV-GS mark (safety-tested)
Technical Data
| Type |
Ozone output
(g Ozon/h)* |
Cooling water consumption (m³/h) |
Width
mm |
Height
mm |
Depth
mm |
| BONa 1D |
80 |
0,1 |
800 |
1950 |
500 |
| BONa 2E |
120 |
0,18 |
1600 |
1950 |
500 |
| BONa 2D |
160 |
0,2 |
1600 |
1950 |
500 |
| BONa 3D |
240 |
0,3 |
2000 |
1950 |
500 |
| BONa 4D |
320 |
0,4 |
2400 |
2200 |
600 |
| BONa 5D |
400 |
0,5 |
2400 |
2200 |
600 |
| BONa 6D |
480 |
0,6 |
2800 |
2200 |
600 |
| BONa 7D |
560 |
0,7 |
3200 |
2200 |
600 |
| BONa 8D |
640 |
0,8 |
3400 |
2200 |
600 |
| BONa 9D |
720 |
0,9 |
3400 |
2200 |
600 |
* measured to comply with DIN at a concentration of 20 g ozone per cubic meter of gas used under normal conditions |